MovingPackets.net
  • Home
  • Disclosures
  • About
Recent Posts
  • [ February 18, 2021 ] Zodiac FX Gets a 3D Printed Case 3D Printing
  • [ February 16, 2021 ] Upgrading Firmware on Northbound Networks Zodiac FX Networking
  • [ February 15, 2021 ] Farewell to Northbound Networks Northbound Networks
  • [ June 30, 2019 ] Response to “Certifications Are Not A Big Deal. Stop Being a Princess About It.” Ramblings
  • [ June 20, 2019 ] Cranky Old Network Engineer Complains About The Youth Of Today Ramblings
HomeNetworkingUbiquiti

Ubiquiti

Ubiquiti Networks Logo

Unifi US-8 PoE Passthrough With The Cisco 3560CX

November 20, 2017 John Herbert 0

As part of my “everything should be on a UPS” strategy, I recently replaced a regular 8-port gigabit switch with a Ubiquiti Unifi US-8 Ethernet switch because the US-8 can be powered using POE (Power […]

Ubiquiti Networks Logo

Ok, I’m Giving Ubiquiti Networks Another Chance

September 28, 2017 John Herbert 0

After quite a few discussions resulting from my Epic Evaluation: Ubiquiti ERPro-8 vs Play-Doh where (spoiler alert!) the Play-Doh™ won hands down after an exhaustive six-month test, I’ve been persuaded to give Ubiqiuti Networks (aka […]

PlayDoh vs ERPro-8

Epic Evaluation: Ubiquiti ERPro-8 vs Play-Doh

June 2, 2017 John Herbert 8

It’s the bake off you’ve been waiting for; a five-month real life test of a Ubiquiti ERPro-8 (EdgeRouter Pro) and a tub of Play-Doh™! Over a period of five months I carefully evaluated these two very useful […]

RSS Feed RSS - Posts

Categories

Monthly Archives

Recent Comments

  • Jeremy G on Zodiac FX Gets a 3D Printed Case
  • fengster on Zodiac FX Gets a 3D Printed Case
  • Joe Harrell on Pockethernet – A Smartphone-Enabled Cable/Link/IP Tester
  • Back to BIND (with OpenDNSSEC) – FOSS Notes on BIND: Enabling TSIG for Zone Transfers
  • After OpenFlow World Congress, analyst questions open source – RKS TECH on Riverbed Unleashes A Hungry “Project Tiger”

Copyright © 2021 | MH Magazine WordPress Theme by MH Themes